(231) 943-7061
| HOME |
| ACCESSORIES |
| ADVANTAGES |
| POOLS |
| SERVICES |
| SPAS / SAUNAS |
| LINKS |
| CONTACT |
| TANNING BEDS |
| Comparison: ProSun vs. The Competition |
|
| ProSun | Beds are made of tube steel in construction, throughout the canape, hinges are steel not plastic (Bench), vinyl is used for durability, most beds have slick strips for easy cleaning and speedy lamp replacement |
| The Competition | Most of the beds are made of plastic or aluminum both inside and out. |
| ProSun | Use light source lamps. (Best in the industry 5.0 spectrum) Comparable to the sun during 12:00 - 1:00 p.m. |
| The Competition | Might use poor quality lamps |
| ProSun | 2 year warranty |
| The Competition | May only have a 6 month warranty, that only covers case to case. |
| ProSun | The tanning dimensions and acrylics are wide and flat (almost like a bed) customer receives a comfortable, and even tan. |
| The Competition | Some acrylics are concaved and tunnel shaped, arms fall to the side, which puts you in an uncomfortable position. |
| ProSun | Vented end caps that vent the heat up and out of the bed. Cooling fans built inside that keep components cooler. This prevents hot spots while tanning and minimizes down time for parts (when over heated needs repair) |
| The Competition | Might have poor cooling units. |
| ProSun | Beds are higher off the ground (making it easier to access the bed). |
| The Competition | May put lamps farther away from tanners, which minimizes the tanning results. |
| ProSun | 3 minute cooling down period (which helps the life of the bed). |
Tanning Supplies
Tanning Main Page
Back to Home
©Walton Weber Rodes Poolside, Inc., 2003
This site maintained by:
